AllerAir Fume Extractor Air Purifiers.
2" Deep HEPA filter for particle filtration. Custom specialty adsorbent, 30 lbs. for effective chemicals adsorption. 2" Thick pre filter.

black

SPEC1. Single Arm 4" x 62" Flex with 8" Hood.
Allows to serves a singe workstation.

SPEC2. Two Arms 4" x 62" Flex with 8" Hood.
Allows to serve two neighboring workstations.

SPEC3. Two Arms 3" x 62" Flex with Beveled Inlet.
Allows to serve two neighboring workstations.

AllerAir Fume Extractor Air Purifiers. Technical Specification
Parameter	Description
Air Filtration System	4-Stage. Separate HEPA and Carbon filters
Pre Filter	Polyester Based
HEPA Filter	2” Deep HEPA, 99.97 % @ 0.3 µ
Carbon Filter	30 lbs. of Custom Carbon Blend.
Anti Microbial Filter	2 Intermediate Filters
Ultra Violet (UV) Bulb	No
Photocatalytic Oxidizer	No
Ionizer	No
Filter Change Monitor	No
Motor / Fan Assembly	AC (PSC) Motorized Backward Impeller
Fan Rating, CFM	400
Number of Speed Settings	3- Speed Control
Air Flow by Speed, CFM	50 (Low), 200 (Medium), 400 (High)
Clean Air Delivery Rate (CADR), CFM	270 (1)
Maximum Cleaning Area, sq. ft.	Source Capture
Recommended Cleaning Area, sq. ft.	N/A
Level of Noise, dB (on Low)	40
Power Consumption, Watts.	50 (Low) - 120 (High)
Dimensions, inch.	20" (L) x 22.6" (H) x 16" (D)
Weight, lbs.	130-170 (depending on arm configuration)
Manufacturer's Warranty, Years(2)	10 Years
Power requirements.	120 VAC, 60 Hz
Certification.	UL / CSA

(1) According to Manufacturer's Data. Not AHAM Certified.
(2) 5 Years Parts and Labor, 10 Years Parts Only.

ALLERAIR Fume Extractor Air Purifiers - Detailed Description

AIR FILTRATION SYSTEM

Particle Filter

True HEPA filter in AllerAir Fume Extractor air purifiers traps over 99.97% for all construction particles and dust down to 0.3 micron in size.
Effectively traps particles smaller than 0.3 micron at a rate below 99.97 %.
Filter's lifetime*: 3 to 5+ years.

Activated Carbon Filter

AllerAir MAC-B™ (Mass Activated Carbon Bed) carbon filter contains up to 21 lbs of Activated Granular Carbon in a separate filter canister.
Best adsorbent for removal of 6000 regular chemicals and odors.
2.5" Deep carbon bed extends the dwell time and increases the air filtration efficiency.
Carbon canister can be replaced or refilled.
Durable the all metal casing produces no toxic off-gassing.
Filter's lifetime*: - 2 to 3+ years.

Amount of Activated Carbon per Unit (lbs.)
Model	Spec1	Spec2	Spec3	Spec4
Weight	None	24	28	36

Pre Filter

Polyester based, vacuumable, 1 inch deep.
Traps large dust and dirt particles.
Protects fine true HEPA filter from contamination and extends its lifetime.
Conveniently placed in the air intake of the bottom panel.
Can be easily pulled out with your fingers for cleaning or replacement.
This procedure requires no tools or disassembling of the unit.
Filter's lifetime*: 3 to 4 months.

Vacuum Seal Gaskets

Top and bottom vacuum gaskets seal the filter chamber.
Eliminate polluted air by-pass and improve the overall air filtration efficiency.

MOTOR/FAN ASSEMBLY

High Efficiency PSC (Permanent Split Capacitor) Motor with backward curved impeller fan.
Three speed fan control allows to set the optimal air flow in most situation.
The minimal varnish is used on the motor windings to eliminate the toxic off-gassing

HOUSING DESIGN

Durable all steel housing renders required durability of this job-site tough, rugged air purifiers.
Its cylindrical shape is intended to maximizes the air flow.
Appliance quality baked-on powder coat is durable and scratch resistant.
Black and yellow safety stripes clearly identify the air purifier's specialty application.
Four Wheel Casters on the bottom panel and the carry handle ensure full portability and required maneuverability.

PERFORMANCE

Fan Rating (Free flow) - 400 CFM (Cubic feet per minute).
High Efficiency PSC (Permanent Split Capacitor) Motor ensures Safe and Quiet operation.
Variable control allows to choose the appropriate filtration power for any conditions.
Maximum cleaning area - 1200 sq. ft. at 2 air changes per hour.
Recommended cleaning area - 600 sq. ft. at 4 air changes per hour.
Level of Noise @ 6 ft.: Low - 35 dB, High - 67 dB.

POWER REQUIREMENTS

Power supply: 120 Volts, 60 Hz
Units available for 220-240 Volts, 50 Hz electric power supply at No Extra cost.
Power consumption (Low - High): 40 - 120 Watts.

DIMENSIONS

Dimensions provided for the units with the wheel casters installed.
20 " (L) x 22.6" (H) x 16" (D)

WEIGHT

The actual weight of the units per model.

Actual Weight (lbs.)
Model	Spec1	Spec2	Spec3	Spec4
Weight	45	65	68	70

WARRANTY

Manufacturer's warranty:
- 5 Years Parts and Labor.
10 Year Extended Warranty available at extra cost.

Certification

CSA and UL approved.

* Under normal residential conditions.